MODEL- SP-500            VENDOR- ANTEC INC.
     
FEATURES- SmartPower 2.0- 500 Watt ATX12V v2.0 PSU
       The SmartPower 2.0 is ATX12V v2.0 compliant, with dual+12V rails, 4 
        serial ATA connectors, and Antec's Unique Dual Fans Design for 
        virtually silent operation. All SmartPower 2.0 power supplies carry 
        UL, CUL, TUV, CB, FCC Class B, CE and CCC certified safety 
        approvals.
* ATX12V version 2.0 
* Dual 12V output circuitry provides added system stability and meets 240VA 
  UL requirements and safety purpose: 12V1 for Motherboard and peripherals; 
  12V2 for processor.
* ATX12V v2.0 compliance allows SmartPower 2.0 to consume up to 25% less 
  power than standard power supplies, saving you money on your electric 
  bill. 24-pin power connector with detachable 4-pin section for backwards 
  compatibility with ATX 20-pin motherboards. 
* 4 SATA Connectors support Serial ATA optical drives 
* Flow-through dual 80mm fans (one intake and one exhaust) 
* Unique Dual Fans Technology: exhaust fan starts to spin when the power 
  supply reaches certain temperatures to ensure proper airflow, the second 
  fan spins on power up.
* Industrial grade protection prevents damage resulting from short 
  circuits, power overloads, excessive current, low voltages and excessive 
  voltages.
* Increased 12V output capability for system components that consume more 
  power from 12V rail.
* PCI-E graphic connector 
* Gold plated connector for superior conductivity.
     
  -- SPECIFICATIONs -----------------------------------
Max. Power         - 500 watts
Switches           - ATX Logic on-off 
                     additional power rocker switch 
                     115/230 Volt selector switch
Connectors         - ATX12V
                     3-pin Fan Sensor 
                     SATA
Transient Response - +5V, +12V and 3.3V outputs return to within 5% in less 
                       than 1ms for 20% load change.
P. G. Signal       - 100~500ms                                              
Over Voltage 
        Protection - +5V trip point < +6.5V (recycle AC to reset)
                     +3.3V trip point < +4.1V                             
                     +12V trip point < +14.4V
Leakage Current    - < 3.5mA @ 115VAC
Input Voltage      - 115VAC/230VAC                                    
Input Freq. Range  - 47Hz to 63Hz                                     
Input Surge
      Current (p-p)- <= 60A @ 115VAC
                     <= 80A @ 230VAC
Input Current      - 10.0A for 115VAC
                      5.0A for 230VAC
Hold-up Time       - >= 17ms at Full Load
EMI/RFI            - FCC Class B                                      
APPROVALS          - UL, CUL, TUV, CB, FCC, NEMKO
MTBF - 80,000 hrs. @ 25 degrees C 
SIZE - 5.5"w x 3.4"h x 5.9"d                  WT.- 5.0 lbs.